NEW! An implementation frequency range spread out in 1MHz.
144MHz SSB/CW Pv Handheld transceiver <NTS210>





======== NTS210 ==========
Fequency range --- 144.00 to 145.00MHz
Moduration ------- SSB(USB) and CW
Output power ----- 1W(max)
Oscillator ------- PLL(5KHz/step and FINE-TUNE)
Sensitivity ------ 0.25V(S/N10dB) typ.
Reciever --------- Super heterodyne
Power supply ----- 9.0 to 12.0V(DC)
Current ---------- Receive 40mA(Without signals),Send 600mA(max)
Antena inp.------- 50 Ohm
Dimension -------- 65x38x142mm

Others
1.How to transmit and receive it.
A knob is input of a zero with RIT in the top.A RIT knob is passed to the left at the time of CW after input of a zero, and beat sound is received.
CW-KEY connects the connection code of the accessory (10K sticks.) to the insertion KEY in the SP jack, and transmits a message.There is no changeover switch of SSB and CW.(CW is automatic switching in SSB by KEY-on by the semi breake-in transmission and PTT-on of the microphone.)

2.S meter
A stereophonic plug is connected to the jack for the microphone.
The terminal of the tip is a microphone.
An inside terminal is S meter output.
Signal strength is indicated when the ammeter of 500A is connected to the terminal for that S meter.

NTS210 Instruction manual
NTS210 Transmitte system figure-----(n2-nts210-blk-a.pdf 6KB)Sorry only japanese. The English is constructing now.
NTS210 doesn't take technological standard adaptation proof.
It becomes an application for the guarantee authorization by JARD.
(There is an application form entry example in the instruction manual.)@@



@Reference data
NTS210All circuit figures-----(n2-nts210-sch.pdf 90KB)
Panel figure-----(n2-pnl27.pdf 13KB)
NTS210 The internal photograph of the product-------(n2-210-101a.jpg 58KB)
A circuit board figure is the latest.(NTS210/NTS710)---95KB
PIC microcomputer software(nts27-10.lzh 13KB)



NEW! An implementation frequency range spread out in 1MHz.
@430MHz SSB/CW Pv Handheld transceiver <NTS710>



======== NTS710 ==========
Fequency range --- 430.00 to 431.00MHz
Moduration ------- SSB(USB) and CW
Output power ----- 1W(max)
Oscillator ------- PLL(5KHz/step and FINE-TUNE)
Sensitivity ------ 0.25V(S/N10dB) typ.
Reciever --------- Super heterodyne
Power supply ----- 9.0 to 12.0V(DC)
Current ---------- Receive 70mA(Without signals),Send 700mA(max)
Antena inp.------- 50 Ohm
Dimension -------- 65x38x142mm

NTS710 Instruction manual
NTS710 Transmitter system figure-----(n2-nts710-blk-a.pdf 6KB)Sorry only japanese. The English is constructing now.
NTS710 doesn't take technological standard adaptation proof.
It becomes an application for the guarantee authorization by JARD.
(There is an application form entry example in the instruction manual.)@@



@Reference data
NTS710 They are all circuit figures.-----(n2-nts710-sch.pdf 90KB)
Panel figure-----(n2-pnl27.pdf 13KB)
NTS710 The internal photograph of the product.-------(n2-710-101a.JPG 40KB)
A circuit board figure is the latest.(NTS210/NTS710)---95KB

Other specifications are the same as NTS210.




Regarding the export business of our products, we have appointed
the following company as our representative. Please contact them
as to the purchase of our products.
E-mail:hmcorp@mb.infoweb.ne.jp
HIROMORI CO.LTD



E-mail(Japanese)

BACK TO INDEX